Full Job Description
Job Description Openings on both 1st and 2nd shifts
Position Summary:
A welder welds together metal components as specified by blueprints, work orders, or oral instructions through the use of weld equipment and tools.
Key Responsibilities & Functional Knowledge:
This list is representative of the key areas of responsibility and functional knowledge required of a first class mechanic in the Weld shop. A first class mechanic must demonstrate an advance knowledge of the skills, functional knowledge and abilities required to perform tasks in these and related areas of responsibility.
Advance knowledge means that the mechanic understands how to perform tasks in these categories (including, but not limited to, the specific tasks identified below) and is able to complete them independently, without assistance. This also means that the mechanic has the necessary level of knowledge of the equipment, protective gear, and machinery required to complete these tasks.
Welding & Installation
* Weld structural steel in all positions.
* Weld stainless steel and carbon steel and possibly other alloys
Testing
* Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specificationsRequired Education, Experience, & Skills Minimum Education: High School Diploma/GED
Minimum Relevant Experience: 5 to10 yrs.
A third class mechanic must demonstrate an intermediate understanding of various structural welds and how to operate and maintain the machines that fabricate and repair metal structures, equipment and machinery. Must be proficient in obtained welding certification: SMAW plate, FCAW plate, GMAW-P plate, GTAW Pipe, and any other certification.
* Certification in shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding or informally as stick welding (manual arc welding process that uses a consumable electrode covered with a flux to lay the weld)
* Certification in flux-cored arc welding (FCAW or FCA) (a semi-automatic or automatic arc welding process)
* Certification in gas tungsten arc welding (GTAW) (arc welding process that uses a non-consumable tungsten electrode to produce the weld)
* Certification in gas metal arc welding (GMAW) (a welding process in which an electric arc forms between a consumable wire electrode and the work piece metal(s), which heats the work piece metal(s), causing them to melt, and join)
* Certification in submerged arc welding (SAW) ( a common arc welding process that requires a continuously fed consumable solid or tubular (metal cored) electrode)
* Other certifications for welding various materials to include: carbon steel, stainless steel, copper nickel, and aluminum
Pay Information
This position is covered under a Collective Bargaining Agreement (CBA), which will determine your wages.
Employee Benefits: At BAE Systems, we support our employees in all aspects of their life including health and financial well-being. Benefits for Union employees are governed by a Collective Bargaining Agreement (CBA), so your benefits may differ from those described here. Generally, employees are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, which may include military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.
About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference.
The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repair...just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too.
Our Commitment to Diversity, Equity, and Inclusion:
At BAE Systems, we work hard every day to nurture an inclusive culture where employees are valued and feel like they belong. We are conscious of the need for all employees to see themselves reflected at every level of the company and know that in order to unlock the full potential of our workforce, everyone must feel confident being their best, most sincere self and be equipped to thrive. We provide impactful professional development experiences to our employees and invest in social impact partnerships to uplift communities and drive purposeful change. Here you will find significant opportunities to do meaningful work in an environment intentionally designed to be one where you will learn, grow and belong.
Position Summary:
A welder welds together metal components as specified by blueprints, work orders, or oral instructions through the use of weld equipment and tools.
Key Responsibilities & Functional Knowledge:
This list is representative of the key areas of responsibility and functional knowledge required of a first class mechanic in the Weld shop. A first class mechanic must demonstrate an advance knowledge of the skills, functional knowledge and abilities required to perform tasks in these and related areas of responsibility.
Advance knowledge means that the mechanic understands how to perform tasks in these categories (including, but not limited to, the specific tasks identified below) and is able to complete them independently, without assistance. This also means that the mechanic has the necessary level of knowledge of the equipment, protective gear, and machinery required to complete these tasks.
Welding & Installation
* Weld structural steel in all positions.
* Weld stainless steel and carbon steel and possibly other alloys
Testing
* Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specificationsRequired Education, Experience, & Skills Minimum Education: High School Diploma/GED
Minimum Relevant Experience: 5 to10 yrs.
A third class mechanic must demonstrate an intermediate understanding of various structural welds and how to operate and maintain the machines that fabricate and repair metal structures, equipment and machinery. Must be proficient in obtained welding certification: SMAW plate, FCAW plate, GMAW-P plate, GTAW Pipe, and any other certification.
- Must be able to read, write and comprehend simple instructions
- Must be able to apply common sense understanding to carry out instructions in written, oral or diagram form
- Must be able to calculate and understand units of measure, including fractions and decimals
- Must know how to measure using a scale and tape measure
- Must be able to wear safety PPE and use personal hand tools (adjustable wrenches, wire cutters, pliers, etc.)
- Must be able to obtain a government access badge.
* Certification in shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding or informally as stick welding (manual arc welding process that uses a consumable electrode covered with a flux to lay the weld)
* Certification in flux-cored arc welding (FCAW or FCA) (a semi-automatic or automatic arc welding process)
* Certification in gas tungsten arc welding (GTAW) (arc welding process that uses a non-consumable tungsten electrode to produce the weld)
* Certification in gas metal arc welding (GMAW) (a welding process in which an electric arc forms between a consumable wire electrode and the work piece metal(s), which heats the work piece metal(s), causing them to melt, and join)
* Certification in submerged arc welding (SAW) ( a common arc welding process that requires a continuously fed consumable solid or tubular (metal cored) electrode)
* Other certifications for welding various materials to include: carbon steel, stainless steel, copper nickel, and aluminum
Pay Information
This position is covered under a Collective Bargaining Agreement (CBA), which will determine your wages.
Employee Benefits: At BAE Systems, we support our employees in all aspects of their life including health and financial well-being. Benefits for Union employees are governed by a Collective Bargaining Agreement (CBA), so your benefits may differ from those described here. Generally, employees are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, which may include military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.
About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference.
The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repair...just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too.
Our Commitment to Diversity, Equity, and Inclusion:
At BAE Systems, we work hard every day to nurture an inclusive culture where employees are valued and feel like they belong. We are conscious of the need for all employees to see themselves reflected at every level of the company and know that in order to unlock the full potential of our workforce, everyone must feel confident being their best, most sincere self and be equipped to thrive. We provide impactful professional development experiences to our employees and invest in social impact partnerships to uplift communities and drive purposeful change. Here you will find significant opportunities to do meaningful work in an environment intentionally designed to be one where you will learn, grow and belong.
Job Information
Job Category:
Other
Spotlight
Employer
Related jobs
County Attorney
Dona Ana County
Job Description
PURPOSE SUMMARY.
Serve as in-house counsel to the County. Direct, manage, supervise and coordinate the activities of the legal department and risk management unit; provide legal...
Nov 7, 2024
Las Cruces, NM
Assistant Director, Facilities & Services
Dona Ana County
Job Description
PURPOSE SUMMARY. Under the general supervision of the Facilities & Services Director, the Assistant Director supports the Director in the administration of the Facilities & Ser...
Nov 7, 2024
Las Cruces, NM
Inside Sales/Front Desk
Adams Publishing Group
Inside Sales MMAE – Part Time PositionJob descriptionAbout Adams Publishing Group:APG provides complete news & advertising products, driven to provide high-qualityservices that make a po...
Nov 7, 2024
Easton, MD