Job Description

Join Our Team of Skilled Tradespeople and Take Your Career to the Next Level!

Essential functions of the position include, but are not limited to the following:

FUNCTION: Including but not limited to

• Under the supervision of the Maintenance Manager, I/E Electronic & Instrumentation Technician will utilize strong knowledge of precision measurement science (Metrology), mathematics, physics, and electronics to test, calibrate, troubleshoot, maintain and repair instrumentation/controls. All duties must be performed in compliance with established company, department, and safety policies and procedures within GXP-regulated and non-GXP facilities. The incumbent will execute daily work assignments and ensure timely completion of all scheduled and unscheduled events for instrumentation systems controls, and analytical laboratory instruments. The individual in this role will collect, compile, measure, summarize, and record data obtained during scheduled calibration and/or unscheduled work requests. This position will work in conjunction with Facilities, Engineering, Validation, Manufacturing, and Quality Control Laboratory Departments to help the company and all of its personnel to reach their goals in providing a safe, clean, and efficient environment.

• Electronic and Instrument Technicians are part of the I/E Technician work group and will primarily share work assignments within their job grouping with no inherent or "system imposed" limits. Based on business needs, I/E Technicians will perform maintenance activities including crossing between job groupings where skills are common. Portions of job requires working with voltages up to 600V and under the guidance of NFPA 70E.

EQUIPMENT: Including but not limited to

• Strong knowledge of instrumentation, PLCs and electronic and pneumatic loop control systems within the following disciplines: Analytical, Conductivity, DC and Low Frequency Electromagnetic Flow, Level, Mechanical, Optical, pH, Pressure, Temperature, Time, Speed and Weight.

DUTIES: Including but not limited to

• Perform routine calibrations of instrumentation. Perform maintenance, troubleshooting, repair, design, installation, and configuration of equipment, instrumentation and control systems:

• Identify and correct measurement errors

• Replace instrumentation and controls as needed

• Maintain configuration management to ensure compliance of the system

• Redline drawings, engineering documentation and other technical specifications

• As necessary provide input and support for the design, installation, and upgrade of instrumentation and control systems

• Execute assignments to support Metrology, Facilities, and/or Engineering projects

• Identify "Out of Tolerance" conditions and perform corrective actions to return the device to within specification. Participate with investigating and documenting the potential impact that the "Out of Tolerance" condition may have had on the instrumentation and process.

• Develop and/or revise calibration procedures and job plans while looking for ways to improve how calibrations and troubleshooting is performed in an attempt to make those practices more efficient.

• Provide support and training to peers to improve their abilities and increase their technical knowledge

• Maintain instruments, standards and tools. Perform equipment inspection prior to and upon return from vendor certification and review associated documentation.

• Attend and actively participates in initiatives to support the business. Prepares and assists technicians, managers and planner/schedulers in preparing labor/material estimates. Assists supervision with the assigning, scheduling and prioritization of work order requests using maintenance management systems. Makes recommendations and prepare orders for spare parts, additional stock room items, tools, etc. Consults with supervision and other mechanics on problem resolution/troubleshooting. Keep supervision informed of problem issues.

EDUCATION and Experience:

• Required Proof of

• High School Diploma or Equivalent (GED)

And

• Graduate of an Instrumentation and Controls course (2 years minimum), from a recognized technical institute with subjects covering instrument control systems and component maintenance. With a minimum of 4 years recent full time (8,000 hours) (within the last 10 years) industrial or military experience as an Instrument Technician with a broad spectrum of calibration and process control experience involving but not limited to Conductivity, Flow, Level, pH, Pressure, Temperature, Speed and Weight, RH, Gas Concentrations, Electrical, etc. Must possess good organizational, communication and time management skills, with a strong attention to detail, be able to follow Standard Operating Procedures, Calibration Procedures, and work instructions. Must be self-motivated, able to work both independently and as part of a team with strict adherence to all environmental, health and safety policies and procedures. Candidates must have good comprehension and work experience using calibration principals, along with basic computer skills.

• Completion of a formal 5-year Instrument Technician apprentice program, including work on instrument control systems and component maintenance. With a minimum of 4 years recent full time (8,000 hours) (within the last 10 years) industrial or military experience as an Instrument Technician with a broad spectrum of calibration and process control experience involving but not limited to Conductivity, Flow, Level, pH, Pressure, Temperature, Speed and Weight, RH, Gas Concentrations, Electrical, etc. Must possess good organizational, communication and time management skills, with a strong attention to detail, be able to follow Standard Operating Procedures, Calibration Procedures, and work instructions. Must be self-motivated, able to work both independently and as part of a team with strict adherence to all environmental, health and safety policies and procedures. Candidates must have good comprehension and work experience using calibration principals, along with basic computer skills.

• Verified Military training equivalent to a recognized/accredited trade school program or journeyman apprenticeship program. With a minimum of 4 years recent full time (8,000 hours) (within the last 10 years) industrial or military experience as an Instrument Technician with a broad spectrum of calibration and process control experience involving but not limited to Conductivity, Flow, Level, pH, Pressure, Temperature, Speed and Weight, RH, Gas Concentrations, Electrical, etc. Must possess good organizational, communication and time management skills, with a strong attention to detail, be able to follow Standard Operating Procedures, Calibration Procedures, and work instructions. Must be self-motivated, able to work both independently and as part of a team with strict adherence to all environmental, health and safety policies and procedures. Candidates must have good comprehension and work experience using calibration principals, along with basic computer skills.

OR

• Successful completion of the NCCER Instrumentation assessment or ISA-CCST level 2 certified, with seven (7) years of recent full time (within the last 10 years) industrial or military experience as an Instrument Technician with a broad spectrum of calibration and process control experience involving but not limited to Conductivity, Flow, Level, pH, Pressure, Temperature, Speed and Weight, RH, Gas Concentrations, Electrical, etc. Must possess good organizational, communication and time management skills, with a strong attention to detail, be able to follow Standard Operating Procedures, Calibration Procedures, and work instructions. Must be self-motivated, able to work both independently and as part of a team with strict adherence to all environmental, health and safety policies and procedures. Candidates must have good comprehension and work experience using calibration principals, along with basic computer skills.

OR

• Completion of a relevant technical program from a recognized technical institute (subjects may include: electronics, electrical, math, engineering, physics, etc.) with at least ten (10) years of recent full time (within the last 15 years) industrial or military experience as an Instrument Technician with a broad spectrum of calibration and process control experience involving but not limited to Conductivity, Flow, Level, pH, Pressure, Temperature, Speed and Weight, RH, Gas Concentrations, Electrical, etc. Must possess good organizational, communication and time management skills, with a strong attention to detail, be able to follow Standard Operating Procedures, Calibration Procedures, and work instructions. Must be self-motivated, able to work both independently and as part of a team with strict adherence to all environmental, health and safety policies and procedures. Candidates must have good comprehension and work experience using calibration principals, along with basic computer skills.

Trained in Electrical Safety NFPA-70E (144 hours of formal instruction on electrical safety, electrical system). GMP experience working in a biopharmaceutical facility or equivalent experience in a regulated industry Experience working within a Computerized Maintenance Management System (CMMS) or a Computerized Calibration Management System (CCMS).

Equipment or Machinery Operated:

Working knowledge of hand and power tools, must be able to identify and properly use the correct tools and NIST traceable test equipment for the task assigned including multi-meters, RTDs, temperature baths, dry blocks, pressure indicators, dew point monitors, tachometers, timers, weights, scales and dimension indicators.Working knowledge of pneumatics is also required.

Special Skills or Abilities:

Ability to read blueprints, drawings, technical manuals and based on them, performs necessary operations for the installation and/or repair of equipment.Experience with Hazardous Energy Control and Line Break is desirable.

Special Job Features:

Some heavy lifting, use of solvents, being around and/or in contact with dirt and dust, heat and cold, loud operating equipment, must wear safety shoes, glasses, fall protection, and any other types of PPE required to perform work.May be required to carry a pager and/or a radio, subject to immunizations.To be able to use material handling equipment and man lifts.

Remarks:

Required to take immunizations as prescribed by the company's Health Services Department.

Must wear Company issued uniform per company SOP.

Position is subject to a probationary period.

#VETJOB

#MSJR

Current Employees apply HERE

Current Contingent Workers apply HERE

US and Puerto Rico Residents Only:

Our company is committed to inclusion, ensuring that candidates can engage in a hiring process that exhibits their true capabilities. Please click here if you need an accommodation during the application or hiring process.

We are an Equal Opportunity Employer, committed to fostering an inclusive and diverse workplace. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status, or other applicable legally protected characteristics. For more information about personal rights under the U.S. Equal Opportunity Employment laws, visit:

EEOC Know Your Rights

EEOC GINA Supplement

Pay Transparency Nondiscrimination

We are proud to be a company that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another's thinking and approach problems collectively.

Learn more about your rights, including under California, Colorado and other US State Acts

U.S. Hybrid Work Model

Effective September 5, 2023, employees in office-based positions in the U.S. will be working a Hybrid work consisting of three total days on-site per week, Monday - Thursday, although the specific days may vary by site or organization, with Friday designated as a remote-working day, unless business critical tasks require an on-site presence.This Hybrid work model does not apply to, and daily in-person attendance is required for, field-based positions; facility-based, manufacturing-based, or research-based positions where the work to be performed is located at a Company site; positions covered by a collective-bargaining agreement (unless the agreement provides for hybrid work); or any other position for which the Company has determined the job requirements cannot be reasonably met working remotely. Please note, this Hybrid work model guidance also does not apply to roles that have been designated as "remote".

San Francisco Residents Only:We will consider qualified applicants with arrest and conviction records for employment in compliance with the San Francisco Fair Chance Ordinance

Los Angeles Residents Only:We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance

Search Firm Representatives Please Read Carefully
Merck & Co., Inc., Rahway, NJ, USA, also known as Merck Sharp & Dohme LLC, Rahway, NJ, USA, does not accept unsolicited assistance from search firms for employment opportunities. All CVs / resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. Where agency agreements are in place, introductions are position specific. Please, no phone calls or emails.

Employee Status:

Relocation:

VISA Sponsorship:

Travel Requirements:

Flexible Work Arrangements:

Shift:

Valid Driving License:

Hazardous Material(s):

Job Posting End Date:

*A job posting is effective until 11:59:59PM on the day BEFOREthe listed job posting end date. Please ensure you apply to a job posting no later than the day BEFORE the job posting end date.

Requisition ID:R323073